SGD

APC Power Saving Back-UPS RS 1200 230V

$532.71 $579.67

SKU: BR1200GI/1234187/APCRBC124
MODEL: Power Saving Back-UPS RS 1200 230V
Product Description: High Performance Computer and Electronics UPS for Premium Power Protection. Includes : CD with software , Qty 2- Detachable IEC Power Cord , Telephone Cable , USB cable , User Manual , Warranty card Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in...
Quantity
Add to Wishlist

Product Description:

High Performance Computer and Electronics UPS for Premium Power Protection.

Includes : CD with software , Qty 2- Detachable IEC Power Cord , Telephone Cable , USB cable , User Manual , Warranty card

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic Voltage Regulation (AVR)

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery replacement without tools

Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable

Provides temporary battery power when the utility power is out.

Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Power-saving outlets

Automatically cuts power to idle equipment to conserve electricity.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

 

Product Details:

Back-UPS Pro Features & Benefits

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Manageability

Audible alarms

Provides notification of changing utility power and UPS power conditions

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

USB connection

Use your PC to access additional power protection and management features for your UPS via a USB Port.


Disconnected battery notification

Warns when a battery is not available to provide backup power.

Marketing Features

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Boost Automatic Voltage Regulation (AVR)

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Energy Management Function

Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Protection

Battery and surge protected outlets

Back up and protect your hardware and data during power outages, surges and spikes.

Surge only outlets

Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.

Serviceability

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.

Simple battery replacement

Increases UPS availability by allowing quick, easy battery replacement.

Availability

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.

Energy Management Function

Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

Customizable voltage-transfer points

Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable voltage sensitivity

Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Cold-start capable

Provides temporary battery power when the utility power is out.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Product Specifications:

Output

Output power capacity 720Watts / 1.2 kVA

Max Configurable Power (Watts) 720Watts / 1.2 kVA

Nominal Output Voltage 230V

Output Frequency (sync to mains) 50 Hz, 60 Hz

Output Frequency (not synced)

60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal

Load Crest Factor 3 : 1

Topology Line Interactive

Waveform type Stepped approximation to a sinewave

Output Connections
(5) IEC 320 C13 (selector_surgetitle)
(5) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
Transfer Time 10ms typical : 12ms maximum

Input

Nominal Input Voltage 230V

Input frequency 50/60 Hz +/- 3 Hz (auto sensing)

Input Connections IEC-320 C14

Input voltage range for main operations 176 - 294V

Input voltage adjustable range for mains operation 156 - 300V

Batteries & Runtime

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time 8hour(s)

Replacement Battery   APCRBC124

Expected Battery Life (years) 3 - 5

RBC Quantity 1

Runtime

View Runtime Graph View Runtime Chart

Efficiency

View Efficiency Graph

Communications & Management

Interface Port(s)

Optional Simple Signalling RS232 cable , USB

Control panel

Multi-function LCD status and control console

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating 441Joules

Data Line Protection

Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)

Filtering

Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous

Physical

Maximum Height 301mm , 30.1CM

Maximum Width 112mm , 11.2CM

Maximum Depth 380mm , 38.0CM

Net Weight 11.6KG

Shipping weight 13.2KG

Shipping Height 387mm , 38.7CM

Shipping Width 238mm , 23.8CM

Shipping Depth 488mm , 48.8CM

Color Black

Master Carton Units 1.0

Units per Pallet 24.0

SCC Codes 1073130426875 5

Environmental

Operating Temperature 0 - 40 °C

Operating Relative Humidity 0 - 95 %

Operating Elevation 0-9000meters

Storage Temperature -15 - 45 °C

Storage Relative Humidity 0 - 95 %

Storage Elevation 0-15000meters

Audible noise at 1 meter from surface of unit 45.0dBA

Conformance

Approvals

A-tick, C-tick, CE, ENERGY STAR V1.0 (EU), GOST, GS Mark, Telepermit, TUV

Equipment protection policy

Lifetime : 200000 AUD, Lifetime : 150000 Euros, Lifetime : 75000 GBP

Standard warranty

2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status

RoHS

Compliant

REACH

REACH: Contains No SVHCs

PEP

Available in Documentation tab

EOLI

Available in Documentation tab

http://www.apc.com/support/service/in_warranty_service.cfm In-Warranty Services APC products are backed by comprehensive warranties and policies to afford basic peace of mind right out of the box. Most APC products ship in the United States and Canada with a standard two-year comprehensive warranty. Depending on your location or product you may instead have a one- or three-year warranty. For more information, please consult your accompanying product documentation. Extended warranties and service programs are also available click here for details. Repair services are not available in all locations. Contact your local APC Technical Support Engineer (on-line/via phone) to find out more. Standard In-Warranty Services Customers having difficulty with APC products should attempt to solve those problems through APC's Technical Support Problem Escalation Process. 1. Look for a solution in APC's Technical Support Knowledge Base 2. Contact an APC Technical Support Engineer on-line 3. Contact an APC Technical Support Engineer via phone In-warranty service programs cover problems as defined in the user's manual of installation and operation. For in-warranty service, customers have several options. Please refer to the owner's manual of your product for individual length of warranty. Who Should Use Standard In-Warranty Service Customers who require service during the defined factory warranty period of operation should use in-warranty service. How Does Standard In-Warranty Service Work Defective products may be returned to APC by the customer for replacement or repair during the standard warranty period. Defective products will be replaced or repaired and returned to the customer. Customers who must have original units back rather than replacement units due to assigned asset tags and set depreciation schedules must declare such a need at first contact with APC. It will be APC's standard practice to issue factory reconditioned replacement units in exchange for original units. The warranty on reconditioned units delivered for in-warranty service is 90 days or the remainder of the original warranty period, whichever is longer. Repaired units carry the balance of their original warranty period. Benefits of Standard In-Warranty Service For problems found within the first 30 days of operation, APC will replace defective units with new units and pay all associated shipping charges. For defects found after 30 days, standard service offers quick turnaround time by sending a replacement unit or, if requested, repairing the customer's original UPS system. For companies with assigned asset tags and set depreciation schedules, getting the original back rather than a replacement may be important. Next Day Drop-Off Option Who Should use Next Day Drop-Off Option Customers choosing the next day drop-off option will receive a visit from an APC authorized representative who will deliver a replacement unit to the customer's site while picking up the defective unit. Customers who call before 12:00 p.m. Singapore time will receive their replacement unit the next business day. Customers calling after 12:00 p.m. Singapore time will receive their unit in two business days. How Does the Next Day Drop-Off Option Work This option requires that the customer be present on site at the agreed upon time to accept delivery of the replacement unit. If the customer is not present upon arrival of the APC authorized representative, it will be the customer's responsibility to reschedule the delivery/pickup by calling Technical Support. Deliveries not rescheduled within 7 days will be considered completed and will receive no further action from APC. Customers declaring the need for the return of the original unit will receive the original unit back within 7 days of pickup. Benefits of the Next Day Drop-Off Option For problems found within the first 30 days of operation, APC will replace defective units with new units and pay all associated shipping charges. For defects found after 30 days, next day drop-off service offers quick turnaround time by sending a replacement unit or, if requested, repairing of the customer's original UPS system. For companies with assigned asset tags and set depreciation schedules, getting the original back rather than a replacement may be important. Important Note: At the time of delivery, the faulty unit must be electrically de-installed and ready to be removed from the customer site. Customers who have not electrically de-installed the faulty unit prior to the arrival of the APC representative will be required to reschedule the replacement delivery and will be charged a no trouble found service fee. APC is not responsible for the electrical de-installation of faulty units, but may perform this service on a Time and Materials basis at the customer's request. For further information on our Time and Materials policy, please refer to APC's Terms and Conditions document.

Warranty Information

LIMITED WARRANTIES
Limited Warranties are non-transferable. The following Limited Warranties are given to the original retail purchaser of the following Ashley Furniture Industries, Inc.Products:

Frames Used In Upholstered and Leather Products
Limited Lifetime Warranty
A Limited Lifetime Warranty applies to all frames used in sofas, couches, love seats, upholstered chairs, ottomans, sectionals, and sleepers. Ashley Furniture Industries,Inc. warrants these components to you, the original retail purchaser, to be free from material manufacturing defects.

Recently Viewed Items