SGD

APC Smart-UPS RT 2200VA 230V - Marine

$2,428.48 $2,644.37

SKU: SURTD2200XLIM/2310967
MODEL: Smart-UPS RT 2200VA 230V - Marine
Product Description:  Advanced electrical features Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency Audible alarms Provides notification of changing utility power and UPS power conditions Automatic internal bypass Supplies utility power to the connected loads in the event of a...
Quantity
Add to Wishlist

Product Description:

 Advanced electrical features

Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Double conversion on-line topology

Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

Excellent footprint

Small UPS footprint provides maximum usage of valuable electrical room floorspace

Fast battery charging capability

Allows for reduced battery recharge time, prevents disturbances on the distribution system by correcting the power factor, protects the battery against damage caused by deep discharge and provides backfeed protection.

Field-replaceable power distribution panel

Ensures compatibility with equipment that has different plug types.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Front-access servicing

Simplifies installation and UPS maintenance while minimizing space requirements.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Global safety approvals

UL60950, CSA60950, IEC60950, EN60950 safety approvals. Meets IEC 61000-4-5 Immunity To Surge, and GR-1089-CORE, Section 4, Lightning and AC Power Faults standards.

High online efficiency

Reduces utlility costs, generates less heat.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Intelligent Battery Charging

Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intuitive monitoring

Step by step navigation and menu screens for critical system information and data. Information is easy to access and presented in a very intuitive way.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Network manageable

Provides remote power management of the UPS over the network.

Overload protection

Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Predictive replace battery date

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Programmable frequency

Ensures compatibility with different input frequencies.

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Remote UPS management

Enable management of your UPS by connecting it directly to the network.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Scalable runtime

Allows additional run time to be quickly added as needed.

Serial connectivity

Provides management of the UPS via a serial port.

Sine wave output

Eliminates humming and heat generated when powering tubelights and fans.

Single switched outlet group

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Wide input voltage range

Designed for harsh electrical environments to save battery life.

Product Details:

Marine Features & Benefits

Availability

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.


Manageability

SmartSlot

Customize UPS capabilities with management cards.

Serial connectivity

Provides management of the UPS via a serial port.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.


Serviceability

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Technical support

Our experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Easy to install

Innovative design allows for fast, easy installation by almost anybody.

Product Specifications:

Output

Output power capacity 1.54 KWatts / 2.2 kVA

Max Configurable Power (Watts) 1.54 KWatts / 2.2 kVA

Nominal Output Voltage 230V

Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage

Output Voltage Distortion Less than 3%

Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1

Output Frequency (not synced) 60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal

Other Output Voltages 220, 240

Load Crest Factor 3 : 1

Topology Double Conversion Online

Waveform type Sine wave

Output Connections
(2) IEC 320 C19 (Battery Backup)
(8) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
Bypass     Internal Bypass (Automatic and Manual)


Input

Nominal Input Voltage 230V

Input frequency 50/60 Hz +/- 5 Hz (auto sensing)

Input Connections British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P

Cord Length 8.2ft ( 2.5meters )

Input voltage range for main operations 180 - 280V

Input voltage adjustable range for mains operation 100 - 280V

Number of Power Cords 1

Other Input Voltages 220, 240


Batteries & Runtime

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Included Battery Modules 2

Typical recharge time 2.5hour(s)

Replacement Battery  APCRBC140

Expected Battery Life (years) 3 - 5

RBC Quantity 1

Extendable Run Time 1

Extended Run Options APC-Smart-UPS-RT-2200VA-230V-Marine

Runtime  View Runtime Graph  View Runtime Chart

Communications & Management

Interface Port(s) RJ-45 Serial , Smart-Slot

Pre-Installed SmartSlot™ CardsAP9613

Control panel

LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Emergency Power Off (EPO) Yes

Surge Protection and Filtering

Surge energy rating 555JJoules

Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449


Physical

Maximum Height 17.0inches ( 432mm , 43.2cm )

Maximum Width 5.1inches ( 130mm , 13.0cm )

Maximum Depth 26.0inches ( 660mm , 66.0cm )

Rack Height 3U

Net Weight 120.0lbs. ( 54.55kg )

Shipping weight 140.0lbs. ( 63.64kg )

Shipping Height 13.68inches ( 347mm , 34.7cm )

Shipping Width 23.73inches ( 603mm , 60.3cm )

Shipping Depth 38.6inches ( 980mm , 98.0cm )

Color BlackUnits per Pallet 6.0


Environmental

Operating Environment 32 - 131 °F ( 0 - 55 °C )

Operating Relative Humidity 0 - 95% non-condensing %

Operating Elevation 0-10000ft ( 0-3000meters )

Storage Temperature -15 - 45 °C

Storage Relative Humidity 0 - 95% non-condensing %

Storage Elevation 0-50000ft ( 0-15000meters )

Audible noise at 1 meter from surface of unit 55.0dBA

Online thermal dissipation 609.0BTU/hr

Protection Class IP 20


Conformance

Approvals

CE, DNV, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, KCC

Standard warranty 2 years repair or replace, optional extended warranties available, optional on-site services available


Sustainable Offer Status

RoHS

Compliant

REACH

REACH: Contains No SVHCs

PEP

Available in Documentation tab

EOLI

Available in Documentation tab

 

http://www.apc.com/support/service/in_warranty_service.cfm In-Warranty Services APC products are backed by comprehensive warranties and policies to afford basic peace of mind right out of the box. Most APC products ship in the United States and Canada with a standard two-year comprehensive warranty. Depending on your location or product you may instead have a one- or three-year warranty. For more information, please consult your accompanying product documentation. Extended warranties and service programs are also available click here for details. Repair services are not available in all locations. Contact your local APC Technical Support Engineer (on-line/via phone) to find out more. Standard In-Warranty Services Customers having difficulty with APC products should attempt to solve those problems through APC's Technical Support Problem Escalation Process. 1. Look for a solution in APC's Technical Support Knowledge Base 2. Contact an APC Technical Support Engineer on-line 3. Contact an APC Technical Support Engineer via phone In-warranty service programs cover problems as defined in the user's manual of installation and operation. For in-warranty service, customers have several options. Please refer to the owner's manual of your product for individual length of warranty. Who Should Use Standard In-Warranty Service Customers who require service during the defined factory warranty period of operation should use in-warranty service. How Does Standard In-Warranty Service Work Defective products may be returned to APC by the customer for replacement or repair during the standard warranty period. Defective products will be replaced or repaired and returned to the customer. Customers who must have original units back rather than replacement units due to assigned asset tags and set depreciation schedules must declare such a need at first contact with APC. It will be APC's standard practice to issue factory reconditioned replacement units in exchange for original units. The warranty on reconditioned units delivered for in-warranty service is 90 days or the remainder of the original warranty period, whichever is longer. Repaired units carry the balance of their original warranty period. Benefits of Standard In-Warranty Service For problems found within the first 30 days of operation, APC will replace defective units with new units and pay all associated shipping charges. For defects found after 30 days, standard service offers quick turnaround time by sending a replacement unit or, if requested, repairing the customer's original UPS system. For companies with assigned asset tags and set depreciation schedules, getting the original back rather than a replacement may be important. Next Day Drop-Off Option Who Should use Next Day Drop-Off Option Customers choosing the next day drop-off option will receive a visit from an APC authorized representative who will deliver a replacement unit to the customer's site while picking up the defective unit. Customers who call before 12:00 p.m. Singapore time will receive their replacement unit the next business day. Customers calling after 12:00 p.m. Singapore time will receive their unit in two business days. How Does the Next Day Drop-Off Option Work This option requires that the customer be present on site at the agreed upon time to accept delivery of the replacement unit. If the customer is not present upon arrival of the APC authorized representative, it will be the customer's responsibility to reschedule the delivery/pickup by calling Technical Support. Deliveries not rescheduled within 7 days will be considered completed and will receive no further action from APC. Customers declaring the need for the return of the original unit will receive the original unit back within 7 days of pickup. Benefits of the Next Day Drop-Off Option For problems found within the first 30 days of operation, APC will replace defective units with new units and pay all associated shipping charges. For defects found after 30 days, next day drop-off service offers quick turnaround time by sending a replacement unit or, if requested, repairing of the customer's original UPS system. For companies with assigned asset tags and set depreciation schedules, getting the original back rather than a replacement may be important. Important Note: At the time of delivery, the faulty unit must be electrically de-installed and ready to be removed from the customer site. Customers who have not electrically de-installed the faulty unit prior to the arrival of the APC representative will be required to reschedule the replacement delivery and will be charged a no trouble found service fee. APC is not responsible for the electrical de-installation of faulty units, but may perform this service on a Time and Materials basis at the customer's request. For further information on our Time and Materials policy, please refer to APC's Terms and Conditions document.

Warranty Information

LIMITED WARRANTIES
Limited Warranties are non-transferable. The following Limited Warranties are given to the original retail purchaser of the following Ashley Furniture Industries, Inc.Products:

Frames Used In Upholstered and Leather Products
Limited Lifetime Warranty
A Limited Lifetime Warranty applies to all frames used in sofas, couches, love seats, upholstered chairs, ottomans, sectionals, and sleepers. Ashley Furniture Industries,Inc. warrants these components to you, the original retail purchaser, to be free from material manufacturing defects.

Recently Viewed Items