SGD

Trendnet 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch

$1,068.72 $1,532.71

SKU: TI-PG1284i
MODEL: 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch
Product Description TRENDnet’s 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock,...
Quantity
Add to Wishlist

Product Description

TRENDnet’s 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range (- 40 – 75 °C (- 40 - 167°F)) for harsh environments. L2+ management include features such as PoE port control, 802.1Q / Q-in-Q VLAN, multicast, spanning tree, link aggregation, QoS, IPv4 / IPv6 static routing, ACLs, and 802.1X which allow for network integration flexibility.


Product Details

Industrial Hardened Design



Equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.

Integration Flexibility


Managed features include PoE control, IP static routing, access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.

Fault Tolerance


Features dual redundant power inputs (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure.


Full PoE+ Power Budget



Supplies up to 30 Watts of PoE / PoE+ power per port with a 240 Watts PoE power budget

Network Ports and Capacity


8 x Gigabit PoE+ ports and 4 x Gigabit SFP slots allow for a 24 Gbps switching capacity and 1 x console (RJ-45 to RS-232) for out-of-band management

Integrated DIN-Rail Mount


IP30 rated metal enclosure with integrated DIN-Rail mounting hardware

Full PoE Control Per Port


PoE control features include enabling / disabling PoE and class, power priority, PD alive check, scheduling, and power delay per port using CLI or web management.

Traffic Management


Managed features include 802.1Q / Q-in-Q / GVRP / MAC & Protocol-Based VLAN, IGMP v1 / 2 / 3, IGMP Snooping, MLD, MVR, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP / MSTP spanning tree, static and dynamic link aggregation, and Xpress Ring + ERPS protection for flexible network integration.

Layer 2+ Management


Offers IPv4 / IPv6 static or DHCPv4 / v6 assignment, IPv4 / IPv6 static routing and proxy ARP, DHCP server / relay / option 82, and DHCP server snooping / screening to filter out unauthorized DHCP servers

Access Controls


Management via HTTPS and SSH protocols and features such as trusted host, ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, IP Source Guard provide layered network access controls.

System Monitoring


Monitoring features include SNMP v1 / v2c / 3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, SFP DDMI, and ModBus / TCP.

Redundant Power


Dual redundant power inputs (primary and RPS) with overload current protection

Alarm Output


Alarm relay output triggered by power failure of primary and / or redundant power and failure per port (DIP switch)

Jumbo Frame


Sends larger packets, or Jumbo Frames (up to 10 K)

Wide Temperature


Hardened switch is rated for an operating temperature range of - 40 to 75 °C (-40 to 167 °F)

Electro Magnetic Compliance


Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments

Shock and Vibration Resistant


Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6)

LED Indicators


LED indicators convey power, redundant power, alarm, SFP, PoE, and network port status

Grounding Point


Grounding point protects equipment from external electrical surges

Specifications


Standards
IEEE 802.1d
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3at

Device Interface
8 x Gigabit PoE+ ports
4 x Gigabit SFP slots
1 x Console port (RJ-45)
6-pin removable terminal block (Primary / RPS power inputs & alarm relay output)
DIP switch (Alarm for primary / RPS power and ports / slots failure)
LED indicators

Data Transfer Rate
Ethernet: 10 Mbps (half-duplex), 20 Mbps (full-duplex)
Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps (full-duplex)
Gigabit Ethernet: 2000 Mbps (full-duplex)
SX / LX: 2000 Mbps (full-duplex)

Performance
Switch fabric: 24 Gbps
RAM buffer: 128 MB
MAC address table: 16 K entries
Jumbo frames: 10 KB
Forwarding rate: 17.86 Mpps (64-byte packet size)

Management
CLI (Console, Telnet, SSH)
HTTP / HTTPS (SSL) web based GUI
SNMP v1, v2c, 3
SNMP trap
RMON groups 1, 2, 3, 9
LLDP
SNTP
SMTP alert
Syslog
Port statistics / utilization
Traffic monitor
Port mirror (Ingress, Egress, Both)
Storm control (Multicast, DLF, Broadcast)
Modbus / TCP
IPv6 static IP address, DHCPv6 client
Dual Image
Auto Provision via FTP / TFTP / HTTP Server
Xpress Ring
ERPS (Ethernet Ring Protection Switching) G8032v2
SFP DDMI (Digital Diagnostic Monitoring Interface)

MIB
MIB II RFC 1213
Bridge MIB RFC 1493
Ethernet Interface MIB RFC 1643
RMON MIB RFC 1757

Spanning Tree
STP (Spanning Tree protocol)
RSTP (Rapid Spanning Tree protocol)
MSTP (Multiple Spanning Tree protocol)

Link Aggregation
Static link aggregation
802.3ad dynamic LACP
Up to 6 link aggregation groups

Quality of Service (QoS)
802.1p Class of Service (CoS)
DSCP (Differentiated Services Code Point)
Bandwidth control per port
Queue Scheduling: Strict Priority (SP), Weighted Round Robin (WRR)

VLAN
802.1Q tagged VLAN
MAC-based VLAN
Dynamic GVRP
Protocol-based (Ethernet II, Non-LLC-SNAP, LLC-SNAP)
Q-in-Q VLAN stacking / double VLAN (port-based, selective)
Port isolation
Up to 256 VLAN groups, ID range 1-4094

Multicast
IGMP snooping v1, v2, v3
MVR
MLD v1, v2
IGMP filtering / querier / proxy
Static multicast address
Up to 256 multicast entries

Access Control
802.1X port-based network access control RADIUS
Local dial-in user authentication
DHCP snooping / screening
Loopback detection
ARP inspection
IP Source Guard
IP-MAC-Port binding
Trusted host
MAC address learning

ACL IPv4
MAC Address
VLAN ID
Ethernet Type
IP Protocol 0-255
TCP / UDP Port 1-65535
DSCP

Layer 3 Features
IPv4 / IPv6 static routing
IPv4 / IPv6 proxy ARP
IP interfaces: Up to 16
Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100)
DHCP Server / Relay / Option 82

Special Features
CLI & web based management
Full power PoE+
Wide operating temperature range
Dual redundant power inputs
Alarm relay triggered by power and ports / slots failure
Surge / ESD protection
L2+ management features

Power
PWR (Primary) terminal input: 48 – 57 V DC (TI-S24048 sold separately)
RPS (Redundant) terminal input: 48 – 57 V DC (TI-S24048 sold separately)
Consumption: 18 W (max.), 260 W (max.) with PoE+ fully loaded

Optional Power Supply (TI-S24048 sold separately)
Input: 100-240 V AC, 50 / 60 Hz, 1.8 A 125-370 V DC
Output: 240 Watts, 48 V, 5 A
DIN-rail: TS-35 / 7.5 or 15
Operating Temperature: - 25 to 70 °C (- 13 to 158 °F)

PoE
PoE budget: 240 W
Up to 15 W per port for PoE
Up to 30 W per port for PoE+
Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
PoE enable / disable per port setting, priority, scheduling, power delay, and PD alive check

Enclosure
IP30 rated metal enclosure
DIN-Rail mount
Grounding point
ESD (Ethernet) Protection: 8 KV DC
Surge (Power) Protection: 6 KV DC

MTBF
99,992 hrs @ 75 °C
322,805 hrs @ 25 °C

Operating Temperature
- 40 to 75 °C (-40 to 167 °F)

Operating Humidity
Max. 95% non-condensing
Dimensions

170 x 132 x 50 mm (6.69 x 5.2 x 1.97 in.)

Certifications
CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)

3 Years Limited Warranty

Warranty Information

LIMITED WARRANTIES
Limited Warranties are non-transferable. The following Limited Warranties are given to the original retail purchaser of the following Ashley Furniture Industries, Inc.Products:

Frames Used In Upholstered and Leather Products
Limited Lifetime Warranty
A Limited Lifetime Warranty applies to all frames used in sofas, couches, love seats, upholstered chairs, ottomans, sectionals, and sleepers. Ashley Furniture Industries,Inc. warrants these components to you, the original retail purchaser, to be free from material manufacturing defects.

Recently Viewed Items