SGD

APC Smart-UPS 3000VA LCD RM 2U 230V

$2,470.36 $2,689.99

SKU: SMT3000RMI2U/1559769/RBC43
MODEL: Smart-UPS 3000VA LCD RM 2U 230V
Product Description: Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and...
Quantity
Add to Wishlist

Product Description:

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable

Provides temporary battery power when the utility power is out.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Energy meter

Provides actual kilowatt hours of usage for energy conscious users.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency

Reduces utlility costs, generates less heat.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Network manageable

Provides remote power management of the UPS over the network.

Outlet group control

Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Predictive replace battery date

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Sequenced network shutdown and reboot

Customize network shutdown and reboot sequence of connected servers and UPSs.

Serial connectivity

Provides management of the UPS via a serial port.

Single switched outlet group

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

StruxureWare Data Center Expert compatible

Enables centralized management via StruxureWare Data Center Expert.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Wide input voltage range

Designed for harsh electrical environments to save battery life.

Product Details:

Smart-UPSFeatures & Benefits

Serviceability

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Resettable circuit breakers

Enables a quick recovery from overload events.

Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.


Adaptability

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.


Manageability

LED status indicators

Quickly understand unit and power status with visual indicators.

Audible alarms

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Serial connectivity

Provides management of the UPS via a serial port.

Network manageable

Provides remote power management of the UPS over the network.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification

Warns when a battery is not available to provide backup power.


Availability

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.


Marketing Features

Smarter productivity with ability to tailor to your specific application needs

Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Avoids costly power problems by keeping your IT equipment and data safe and available

Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems

Save time with easy and convenient remote accessibility

Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.

Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management

Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.
Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Product Specifications:

Output

Output power capacity 2.7 KWatts / 3.0 kVA

Max Configurable Power (Watts) 2.7 KWatts / 3.0 kVA

Nominal Output Voltage 230V

Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage

Output Frequency (sync to mains)

47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal

Other Output Voltages 220, 240

Topology Line Interactive

Waveform type Sine wave

Output Connections

(3) IEC Jumpers (Battery Backup)
(1) IEC 320 C19 (Battery Backup)
(8) IEC 320 C13 (Battery Backup)
Transfer Time 4ms typical : 8ms maximum


Input

Nominal Input Voltage 230V

Input frequency 50/60 Hz +/- 3 Hz (auto sensing)

Input Connections British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P

Cord Length 2meters

Input voltage range for main operations 160 - 286V

Input voltage adjustable range for mains operation 151 - 302V

Number of Power Cords 1

Other Input Voltages 220, 240


Batteries & Runtime

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time 3hour(s)

Replacement Battery  RBC43

Expected Battery Life (years) 3 - 5

RBC Quantity 1

Runtime

View Runtime Graph    View Runtime Chart

Efficiency

View Efficiency Graph

Communications & Management

Interface Port(s)     USB

Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console

Audible Alarm

Alarm when on battery : distinctive low battery alarm : configurable delays

Available SmartSlot™ Interface Quantity    1


Surge Protection and Filtering

Surge energy rating 320Joules


Physical

Maximum Height 86mm , 8.6cm

Maximum Width 480mm , 48.0cm

Maximum Depth 683mm , 68.3cm

Rack Height 2U

Net Weight 44.28kg

Shipping weight 51.7kg

Shipping Height 254mm , 25.4cm

Shipping Width 600mm , 60.0cm

Shipping Depth 980mm , 98.0cm

Units per Pallet 8.0


Environmental

Operating Environment 0 - 40 °C

Operating Relative Humidity 0 - 95 %

Operating Elevation 0-3000meters

Storage Temperature -15 - 45 °C

Storage Relative Humidity 0 - 95 %

Storage Elevation 0-15000meters

Audible noise at 1 meter from surface of unit 55.0dBA

Online thermal dissipation 348.0BTU/hr


Conformance

Approvals

CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR V1.0 (EU), GS Mark, IRAM, RCM, VDE, WEEE

Standard warranty

3 years repair or replace (excluding battery) and 2 year for battery

Sustainable Offer Status

RoHS

Compliant

REACH

REACH: Contains No SVHCs

PEP

Available in Documentation tab

EOLI

Available in Documentation tab

http://www.apc.com/support/service/in_warranty_service.cfm In-Warranty Services APC products are backed by comprehensive warranties and policies to afford basic peace of mind right out of the box. Most APC products ship in the United States and Canada with a standard two-year comprehensive warranty. Depending on your location or product you may instead have a one- or three-year warranty. For more information, please consult your accompanying product documentation. Extended warranties and service programs are also available click here for details. Repair services are not available in all locations. Contact your local APC Technical Support Engineer (on-line/via phone) to find out more. Standard In-Warranty Services Customers having difficulty with APC products should attempt to solve those problems through APC's Technical Support Problem Escalation Process. 1. Look for a solution in APC's Technical Support Knowledge Base 2. Contact an APC Technical Support Engineer on-line 3. Contact an APC Technical Support Engineer via phone In-warranty service programs cover problems as defined in the user's manual of installation and operation. For in-warranty service, customers have several options. Please refer to the owner's manual of your product for individual length of warranty. Who Should Use Standard In-Warranty Service Customers who require service during the defined factory warranty period of operation should use in-warranty service. How Does Standard In-Warranty Service Work Defective products may be returned to APC by the customer for replacement or repair during the standard warranty period. Defective products will be replaced or repaired and returned to the customer. Customers who must have original units back rather than replacement units due to assigned asset tags and set depreciation schedules must declare such a need at first contact with APC. It will be APC's standard practice to issue factory reconditioned replacement units in exchange for original units. The warranty on reconditioned units delivered for in-warranty service is 90 days or the remainder of the original warranty period, whichever is longer. Repaired units carry the balance of their original warranty period. Benefits of Standard In-Warranty Service For problems found within the first 30 days of operation, APC will replace defective units with new units and pay all associated shipping charges. For defects found after 30 days, standard service offers quick turnaround time by sending a replacement unit or, if requested, repairing the customer's original UPS system. For companies with assigned asset tags and set depreciation schedules, getting the original back rather than a replacement may be important. Next Day Drop-Off Option Who Should use Next Day Drop-Off Option Customers choosing the next day drop-off option will receive a visit from an APC authorized representative who will deliver a replacement unit to the customer's site while picking up the defective unit. Customers who call before 12:00 p.m. Singapore time will receive their replacement unit the next business day. Customers calling after 12:00 p.m. Singapore time will receive their unit in two business days. How Does the Next Day Drop-Off Option Work This option requires that the customer be present on site at the agreed upon time to accept delivery of the replacement unit. If the customer is not present upon arrival of the APC authorized representative, it will be the customer's responsibility to reschedule the delivery/pickup by calling Technical Support. Deliveries not rescheduled within 7 days will be considered completed and will receive no further action from APC. Customers declaring the need for the return of the original unit will receive the original unit back within 7 days of pickup. Benefits of the Next Day Drop-Off Option For problems found within the first 30 days of operation, APC will replace defective units with new units and pay all associated shipping charges. For defects found after 30 days, next day drop-off service offers quick turnaround time by sending a replacement unit or, if requested, repairing of the customer's original UPS system. For companies with assigned asset tags and set depreciation schedules, getting the original back rather than a replacement may be important. Important Note: At the time of delivery, the faulty unit must be electrically de-installed and ready to be removed from the customer site. Customers who have not electrically de-installed the faulty unit prior to the arrival of the APC representative will be required to reschedule the replacement delivery and will be charged a no trouble found service fee. APC is not responsible for the electrical de-installation of faulty units, but may perform this service on a Time and Materials basis at the customer's request. For further information on our Time and Materials policy, please refer to APC's Terms and Conditions document.

Warranty Information

LIMITED WARRANTIES
Limited Warranties are non-transferable. The following Limited Warranties are given to the original retail purchaser of the following Ashley Furniture Industries, Inc.Products:

Frames Used In Upholstered and Leather Products
Limited Lifetime Warranty
A Limited Lifetime Warranty applies to all frames used in sofas, couches, love seats, upholstered chairs, ottomans, sectionals, and sleepers. Ashley Furniture Industries,Inc. warrants these components to you, the original retail purchaser, to be free from material manufacturing defects.

Recently Viewed Items